Area Converter: what this tool is for
Converting two-dimensional area and land surface units is fundamental across real estate transactions, architectural floor planning, agricultural land management, and construction estimation: comparing price per square foot (sq ft) on US listings with European square meters (m²), sizing farmland parcels in acres and hectares, or ordering tile and hardwood flooring per square meter. Xorvian's Area Converter provides instant, mathematically exact conversions across 10 standardized surface units.
The tool supports 10 standardized area units: metric units including square millimeters (mm²), square centimeters (cm²), square meters (m², the SI fundamental unit), ares (a, 100 m²), hectares (ha, 10,000 m²), and square kilometers (km²), alongside imperial and US customary units including square feet (sq ft / ft²), square yards (sq yd / yd²), acres (ac), and square miles (sq mi / mi²).
Area conversion scales quadratically with linear dimensions ($A = L \times W$). Because 1 meter equals 100 centimeters, 1 square meter contains $100^2 = 10,000\text{ cm}^2$. Similarly, because 1 foot equals 0.3048 m, 1 square foot equals $0.3048^2 = 0.09290304\text{ m}^2$. The converter applies these exact quadratic factors with zero precision degradation.
Frequent area conversion mistakes include forgetting the squared factor (assuming 1 m² equals 100 cm² instead of 10,000 cm²), confusing acres (4,046.86 m²) with hectares (10,000 m²), or treating linear measurements as surface areas without accounting for width.
No file stored
Nothing is saved on our servers, during or after processing.
Local processing
The computation runs in your browser whenever the technology allows it.
Instant result
No waiting and no export queue: the result appears live.
Free, no account
No sign-up, no daily limit and no intrusive ads.
What this tool gives you
10 Standard Metric & Imperial Units
Convert seamlessly between mm², cm², m², ares, hectares, km², square feet (sq ft), square yards, acres, and square miles.
Legally Exact Geodetic Factors
Built on international treaty definitions: 1 sq ft = 0.09290304 m² exact, 1 ha = 10,000 m² exact, and 1 acre = 4,046.8564224 m² exact.
Real-Time Multi-Unit Comparison Matrix
View your converted area across all other 9 surface units simultaneously in a clean side-by-side comparative table.
Tailored for Real Estate, Architecture & Farming
Instantly translate international property floorplans, agricultural parcel deeds, or commercial zoning plots.
Instant One-Click Swap
Reverse source and target area units immediately with the bidirectional swap button without re-entering numbers.
Smooth Comma & Decimal Point Parsing
Parses both periods and commas effortlessly for micro-machining tolerances as well as vast geographical territories.
Real-world examples
Official mathematical factors relative to the square meter and practical real-world area benchmarks:
Real Estate Property Comparison (US vs. Europe)
A homebuyer reviews a Montreal condo listing advertising 1,150 square feet (sq ft). Converting 1,150 ft² to square meters yields 106.84 m², allowing direct comparison against standard European residential layouts.
Agricultural and Forestry Land Transactions
A legal land deed specifies the purchase of a 48,500 m² woodland plot. Converting m² to hectares gives 4.85 ha (4 hectares and 85 ares), enabling rapid verification against rural cadastral registries.
Floor Tiling and Renovation Estimations
A contractor calculates the materials needed for a 42 m² living room. Converting to square centimeters yields 420,000 cm², simplifying the calculation for 60 × 60 cm tiles (3,600 cm² each, requiring 117 tiles plus cuts).
Commercial Land Sizing in Acres
An investor evaluates a 5-acre commercial development parcel in the US. Converting acres to hectares gives 2.02 ha (20,234 m²), facilitating floor area ratio (FAR) and parking footprint calculations.
How to use Area Converter
Enter the Area Value
Type your number into the 'Value' field. Both decimals with periods (150.5) and commas (150,5) are parsed smoothly.
Select the Source Unit
Choose the unit your starting measurement is expressed in (e.g., Square Feet ft²) from the source selector.
Select the Target Unit
Choose the desired target unit (e.g., Square Meters m²) from the target selector.
Swap Units with One Click
Click the bidirectional arrow button to instantly invert source and destination area units.
Copy the Converted Area
The primary result updates instantly; click the copy icon to transfer the formatted answer directly to your clipboard.
Check the Multi-Unit Comparison
Review the dynamic multi-unit matrix beneath the output to see your surface area converted across all 9 other units simultaneously.
Tips and mistakes to avoid
Quick Mental Math: Square Feet to Square Meters
To quickly estimate sq ft in m²: divide by 10 and subtract roughly 7% from your answer (e.g., 1,000 sq ft / 10 = 100 − 7 = 93 m²; exact is 92.90 m²).
Rule of Thumb: 1 Hectare ≈ 2.47 Acres
1 hectare (10,000 m²) is approximately 2.47 acres. Conversely, 1 acre (4,046.86 m²) is roughly 40% of a hectare (0.405 ha).
Understanding the European 'Are'
1 are equals exactly 100 m² (a square of 10 m side). 100 ares make 1 hectare. A land plot of 15 ares measures 1,500 m².
Order Extra Flooring for Cut Waste
When ordering flooring or tiling materials by the square meter or square foot, always include a 5% to 10% safety overage for perimeter cuts.
Avoid : Multiplying by 100 Instead of 10,000 (m² to cm²)
Because 1 m = 100 cm, 1 m² = 100 × 100 = 10,000 cm². Multiplying by 100 results in a severe 100-fold underestimation.
Avoid : Confusing Acres and Hectares
1 hectare is 10,000 m², which is nearly 2.5 times larger than an acre (4,046.86 m²). Confusing them drastically distorts agricultural yield and land value estimates.
Avoid : Confusing Linear Feet with Square Feet
Linear feet measure 1D length, whereas square feet measure 2D area. To calculate square footage, length must always be multiplied by width.
Frequently asked questions
Answers to the questions people ask about Area Converter.
Related tools
Tools people open right after this one.
Calculate hypotenuse (a² + b² = c²), missing side, acute angles, area, and perimeter of a right-angled triangle.
Updated on August 2026. See all tools